Specifications:
Dimensions: 6 x 11 x 17 inches (15 x 28 x 43 cm)
Weight: 15 lbs. (6.8 kg)
Output Waveform:
Cut: 516 kHz sinusoid; Blend 1:516 kHz of sinusoid at 70% duty cycle recurring at 31 kHz; Blend 2: 516 kHz bursts of sinusoid at 45% duty cycle recurring at 31 kHz; Blend 3: 516 kHz bursts of sinusoid at 20% duty cycle recurring at 31 kHz; Coag: 516 kHz damped sinusoidal bursts with a repetition frequency of 31 kHz; Microbipolar: 516 kHz sinusoid, unmodulated.
Output Characteristics: Max. (open circuit) Rated Load Nominal Power Crest Factor
P-P voltage ohms at rated load watts at rated load typical
Cut 2400 300 200 1.8 @100 W
Blend 1 2800 300 175 2.7 @100 W
Blend 2 3200 300 150 3.3 @100 W
Blend 3 3600 300 125 4.6 @100 W
Coag 5200 300 75 8.0 @50 W
Microbipolar 900 100 50 1.8 @40 W
Input Power source:
Max. operating range: 85-135 or 170-270 VAC; Nominal operating range: 110-120 or 220-240 VAC
Max. Current Max. Power
Idle 0.5 A 60 W
Cut 5.0 A 600 W
Coag 3.0 A 400 W
Microbipolar 2.0 A 180 W
The line frequency may vary between 50 and 60 Hz
Line Regulation:
Between 85-135 volts or 170-270 volts input, output power into nominal load will vary no more than 20% or 5 watts, whichever is greater
REM Contact Quality Mon.:
Measurement frequency: 140 kHz ± 20 kHz. Measurement current: 3.0 mA, maximum
Low Frequency Leakage:
Source current nominal polarity, intact chassis ground: <10 μA, ground open: <50 μA.
Source current reverse polarity, ground open: <50 μA. sink current, 135 VAC applied, all inputs: <20 μA.
Chassis source current, ground open: <100 μA
High Frequency Risk Parameters:
Microbipolar RF leakage current: <150 mA. Monopolar RF leakage current: < 150 mA